Transmitter;
P/N 62008 |
SUBCARRIER CENTER PERIOD
(T-out) |
2 milliseconds to 100
microseconds (500 Hz to 10 kHz); typical at 625 microseconds
(1.6 kHz) |
DEVIATION PERIOD WIDTH |
100 microseconds (Typical)
|
LINEARITY |
+/- 0.2% with respect to
subcarrier period deviation |
PERIOD RESPONSE |
20% of subcarrier center
period |
SENSITIVITY |
LVDT - Typically 0.5
microseconds per ft-ton (US) at subcarrier center period Strain
Gauge - a multiple function of LVDT sensitivity |
CARRIER FREQUENCY |
10.7 MHz, screwdriver
adjustable over +/- 1 MHz range RF |
POWER OUTPUT |
Typically 6 milliwatts into
150 ohm load |
POWER REQUIREMENTS |
+/- 5 VDC, 10 mA, power
regulated, transient protected |
OPERATING TEMPERATURE |
40 to 149° F |
REPEATABILITY |
< 0.1% of measurement |
STABILITY |
0.1% from 60 to 150° F |
INPUT IMPS |
> 30 kilohms |
CALIBRATION |
Digital Auto-Reference |
FM DEVIATION |
150 kHz |
RANGE |
0 to > 1000 ft-tons (US)
|
PHYSICAL CHARACTERISTICS |
|
Dimensions
|
length 15"; height 3";
width 3" |
Weight
|
4 lbs |
Electrical Connections
|
Nylon connectors |
Construction
|
RTV protected circuitry |
TYPICAL MEASUREMENT RANGE |
20 to 1500 microstrain
(strain gauge) +/-0.05” (LVDT) |
LINEARITY |
< 0.6% of full range |
STABILITY (40 to 149° F) |
0.015% drift of
temperature range typical transmitter
0.01% drift of temperature range typical receiver |
REPEATIBILITY |
Better than 0.2% over
temperature and voltage |
Specifications subject to change without notice
See also A03-28 Shaft Horsepower Installation Photo